Corrugatted Box History | Advice | Checklist & Packing Tips  
About Us
Factory Location
Our Clients
Our Quality Policy
Online Quote
Customer Survey
Contact Us

  Customer Area
 Customer ID:  
 Signup Now!
  Corrugated Box History  
The following information was obtained from Fibre Box Handbook by Fibre Box Association The use of corrugated paperboard apparently stemmed from clothing fashions. In Victorian England, gentlemen wore tall, stiff hats. Cylinders of paper were used to help maintain their shape. When they got wet, the paper could be replaced. In 1856, two Englishmen, Healey and Allen, obtained a patent for the first known use of corrugated paper. Made on a hand-cracked adaptation of a collar press, it was used as the lining in hats. It was stronger than the cylinder of plain paper, and its flutes provided cushioning in the sweatband.

The first use of corrugated paper for packaging came in 1871. An American, Albert L. Jones, obtained a patent for the use of corrugated paper for wrapping bottles and glass chimneys for kerosene lamps. It had better cushioning properties than plain paper wraps, and was less messy than sawdust.

Three Years later, in 1874, Oliver Long patented the concept of adding a liner to one side of the corrugated paper to prevent stretching the flutes.

The next few years were devoted to the development of machinery to add one and then two liners to the corrugated sheet. With two liners, corrugated board was stiff and could not be wrapped around glassware. Henry Norris and Robert Thompson teamed up to look for other packaging uses. The concept of cutting and slotting pasteboard to make small folding cartons was already in use, so they tried similar patterns to make boxes. With the addition of slots to accommodate the thickness, they introduced "cellular board boxes" in 1894, which were much lighter and less expensive than wood boxes, and appeared suitable for the shipment of light products. Samples were submitted to Wells Fargo, a major handler of small freight and light express shipments. The boxes performed well in test shipments, and were accepted as shipping containers by Wells Fargo in 1895. This marked the beginning of what is today the largest segment of America's packaging industry.

Improvements in raw materials and manufacturing processes and new uses for corrugated boxes have been numerous. For example, the paperboard used for early corrugated containers was made from straw. About 100 years ago, the kraft process was developed to make pulp from wood. This process is a chemical process that uses sulfate as solvent to dissolve and wash away lignin (a glue that holds cellulose fibers) and that produces the highest yields with the least damage to the fibers and thus the strongest paper. Papermaking improvements gradually extended the range of available grades. Chemical additives were developed to improve wet strength or impart other properties. More recently, higher strength container-board, for a given weight, has been developed through either mechanical or chemical procedures.
Factory Location:
Sunder-Raiwind Road
(2 Km Mull Chowk)
near "Sunder Industrial Estate"
Lahore, Pakistan.
Contact Numbers:
Cell # 92-321-8631333
Cell # 92-333-4315522
About us | Terms & conditions  | Contact us